Top 4 problems with the two-way radios and tips to fix them

To establish remote communications within a secured and private bandwidth, using the phones or mobiles won’t be the best option. Besides, in major areas, you won’t be able to access the communication channel bandwidth due to lack of network. Due to all these cumulative reasons, several companies, organizations, businesses, and other industrial sectors have included the use of portable radio repeater, transmitters, receivers, and more.

These communicating devices are extremely beneficial in terms of establishing transmission and receiving channels within a private bandwidth that can be accessed only by the employees. Despite being so advantageous, we cannot ignore the problems users often have to face. These issues are not usually severe but they can disrupt the business ops which is why knowing about the problems will be more feasible.

Not understanding the charging status

Cause

One of the most common problems with two-way radios or the wireless PA system for office or businesses is the misinterpretation of the charging status. For example, if the charging light beeps with a green signal, it actually means that the battery is charged half-way. During this time, taking it off the charging port will result to incomplete charging cycle and your radio’s battery will deplete faster. Similarly, if you start using the equipment right after the purchase, it will have a direct impact on the battery’s lifetime.

Solution

The most feasible solution for this issue is to understand different charging status as per the instruction manuals. Even though the major statuses remain the same across most radios, transmitting systems, PA wireless systems, and more, the conditions and other such technical details may differ. Therefore, it’s better not to judge all the equipment models and their charging status based on a specific reference.

Delays and lags in signal transmission

Cause

One of the major issues that needs immediate Discount two way radio repair is the presence of delays and lags in the transmitted and received signals. For example, when you hear a speech ten seconds after it was spoken by another person, it means that there is a delay in the transmitted and received signal.

Solution

In most cases, transmission delays can be resolved by pressing the push-to-talk button for a long time or throughout the entire duration of the conversation taking place. Apart from, make sure that the button is released properly to cut off the signal transmission.

Too many interferences and disturbances

Cause

The two way radios are usually connected with each within a certain fixed bandwidth. If the setup is done for an industry, a business, or company, this bandwidth will be private which means no other two way radio or transmission channel can be tuned in any frequency in between the limits. Sometimes, due to incorrect antenna placement or any issue with the signal circuits in the devices, you might have to face interferences and disturbances.

Solution

To solve this problem, first check whether the antenna is installed correctly or not. After correcting the antenna, you have to check if the battery is charged or not, along with the traffic or load in the communication frequency you are using.

Facing sudden dead spots

Cause

Dead spots are considered as areas where the two-way radio won’t be able to transmit or receive the signals. If you somehow land in such a place, you won’t be able to communicate with others. For example, if you are blocked by concrete or lead walls on three sides, the signals won’t be able to cross the walls, and therefore, neither will you be able to hear others nor can they hear you.

Solution

If you face such a situation, try to come out of the place at the earliest. If that is not possible, try to send any other form of signal like emergency messages and more.

Final words

Since now you are aware of the major problems that you might face with the two way radios, it will become easier for you to fix the issues and restore the communication. Besides, you won’t have to wait much in cases of emergencies where immediate connection is required.